Flamemakers

GRS1000 - Micro Flamemaker

The GRS1000 is used to simulate small scale bonfires and campfires on a layout and comes with an attached 1.5V flame-color micro bulb. It can also be used as a very effective "firebox fire" in HO and larger scale steam locomotives.

GRS1000

GRS205 - 1.5V Micro Flamemaker Replacement Bulb

Click Here

The GRS205 contains a replacement GRS104 flame-colored micro bulb for the GRS1000 Micro Flamemaker. Comes with insulating 1/16" heat shrink tubing and a foam sticker replacement.

GRS205

GRS1004 - Super Flamemaker

Click Here

Our GRS1004 Super Flamemaker realistically simulates larger fires such as a burning structure or working blast furnace. The increased level of light required is achieved through the use of a large 7/8" long x 3/16" diameter high-intensity bulb. Use on all scales. For best results use ac power between 16 and 20 volts such as that available from the accessory terminals of a train power pak.

GRS1004

GRS300 - Super Flamemaker Replacement Bulb

The GRS300 is a replacement bulb, with attached wires, for the GRS1004 Super Flamemaker. Comes with insulating 1/16" heat shrink tubing and a foam sticker replacement. Draws 100ma at 12 volts.

GRS300

GRS1014 - Ultimate Flame Master

Click Here

The GRS1014 Ultimate Flame Master (UFM) was developed as a "flame" source intermediate between the GRS1000 and GRS1004. It can be used to replicate everything from "breathing coals" in "N" scale to a roaring fireplace in "G" scale. The UFM recreates (in scale proportions) the color and brilliant sporadic action of a real fire. Viewing may be either direct or indirect; you "set the action" and control lamp brightness. This device has the capability of driving up to six of the larger GRS503 3.0v flame color GOR bulbs. Just like our Ultimate Arc Welder, it comes case assembled with action and brightness controls. The kit includes two custom colored flame bulbs, instructions (with lighting tips) and all required installation materials.

All you need do is connect the wires from this unit to a 12-20 volt ac or dc source, tune to an AM radio station for the effect you want, and sit back to enjoy.

GRS1014