Hardware & Wire

---

CK1045 - #0 Wood Screws (20 pak)

Click Here   These small threaded wood screws are useful wherever small fasteners may be required on the layout. Approx. 7/16" long with a diameter of only 0.06". CK1045

---

CK203-1 - 24 Gauge 2-Conductor Wire (15' roll)

Click Here   Use this wire for those projects requiring heavier current capabilities. The "zip" type wires easily separate once started. Heavy enough for most layout wiring requirements. Similar to stereo speaker wire. CK203-1

---

GRS5006 - 32 Gauge 2-Conductor White Wire (25’ shank)

Click Here   The size of our miniature two-conductor "zip" cord (.021" by .047") makes it one of the smallest two-conductor cords to be found anywhere. Each wire is a 32 gauge stranded conductor and its soft flexibility makes for easy handling and forming. Ideal for loco lighting interconnects and sound systems. Once started, the wires may be separated by merely pulling them apart. Stripping is accomplished with the fingernails. Made with white plastic covering, 25' long. GRS5006

---

32 Gauge Single-Conductor Wire (50' shank)

Choices: CK203-2 - White Wire (50' shank) + $1.98 CK203-4 - Green Wire (50' shank) + $3.98

Click Here   These wires are used wherever single, extremely small conductors are required. The wire is an amazingly small .018" in diameter and may be easily stripped with the fingernails.

---

1/8" Brass Brads

Choices: CK1021 - 1/8" (300) + $7.96 CK1021-1 - 1/8" (60) + $1.98

Click Here   Our 1/8" brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection. Their small size permits usage on even the thinnest of wood and nearly disappear from view when pounded into a conductive tape run. Measure approximately 1/8" by .024".

---

CK1022-1 - 1/4" Brass Brads

Click Here   The 1/4" brads are made of solid brass and can be used for dozens of electrical and woodworking projects! These also measure approximately .024" in diameter. CK1022-1

---

CK1054 - Brad Placement Tool

Over the years, the use of tapewire has become the predominat worldwide method of dollhouse wiring. Its versatility and ease of installation had made it the dollhouse electrician's method of choice. However, to achieve low-profile corners, it is necessary to use tiny 1/8" brass brads to create the necessary electrical interconnection. Although these brads serve this purpose very well, they can be frustrating to hold and install. That's where our new CK1054 Brad Placement Tool comes in. With this tool the brad can be held firmly in place as it is inserted into the tape run. No more lost brads or blue language. They are manufactured of stainless steel with a plastic coated handle for a lifetime of operation. The CK1054 should be a must for every tape wiring toolbox. CK1054

---

Small Hollow Eyelets

Choices: CK1023 - (20 pak) + $0.95 CK1023-1 - (110 pak) + $3.96

Click Here   These brass eyelets may be used in a multitude of applications either as mechanical attachments or for electrical connections. In wood, use our CK1044 awl for placement. The small eyelets are approximately 1/8" long with an I.D. of 0.044" and an O.D. of 0.056". The large eyelets are approximately 3/16" long with an I.D. of 0.054" and an O.D. of 0.071".

---

CK1023-2 - Large Hollow Eyelets (20 pak)

Click Here   The large eyelets measure approximately 3/16" long with an I.D. of .054" and O.D. of .071". CK1023-2

---