Lamps & Bulbs

GRS500 - Axial Bulbs

This is possibly the world’s smallest hobby bulb. Using a locolite module, they work great for lighting loco class lights, number boards, marker lights, ditch lights, backhead gauges, or anywhere no other bulb will fit. (We’ve seen one used as a lighted cigar in an HO figure’s hand.) Specifications: 1.5V, 15ma, 0.75mm dia., 1" pre-tinned leads and 1,000 hr. life. Comes with insulating sleeving, heat shrink tube and instructions.

GRS500

Fluorette Holder

Click Here

These sockets are designed specifically for the GRS400 bulbs. The clip-in feature allows simple bulb installation and replacement. Equipped with solder eyes for wire attachment.

Frosted Fluorette Bulb

Click Here

Use these bulbs for model building or passenger car interior lighting. Specifications: 12-16V, 80ma, 1/4" X 1-1/2", 2,500 hr. life.

Frosted Globe Streetlight Kit

Click Here

This kit comes with a clear 1.5 V micro bulb, a 1-1/2"L X 1/16" dia. brass tubing piece, a drilled 6mm frosted globe and instructions. Simply glue the bulb into the globe, run the wires through the brass tube, place on layout and connect to a 1.5V supply. Use on HO thru S scales. The 6mm globe is equivalent to an 18" globe in HO scale.

The GRS301 Globe Lamp is the same as the GRS302 except there is no brass rod and the bulb comes already glued into the globe.

GRS105 - Green Shade Lamp

Click Here

The GRS105 is a typical outdoor/security lamp found on all types of buildings. It is constructed of stamped brass and painted "Industrial Green" on the outside and "Reflector White" on the inside. Equipped with a 1.5 volt, clear micro bulb. Hand made and hand painted in the USA. 5/16" diameter. For use in HO thru S scale.

GRS105

GRS303 - Oldtyme Gas Streetlight Kit

Click Here

The GRS303 consists of a clear 1.5V micro bulb, a 1-1/2" X 1/16" dia. brass tubing piece, a tapered transparent lens, a plastic cap, and instructions. Installed in the same manner as the GRS302. The lens, with black cap measures 3/8" high and is 3/16" square at the top. Use on all HO through S scales.

GRS303

1.5V and 3.0V Super GOR Bulbs

Click Here

Our line of GOR bulbs are some of the highest quality bulbs of their size in the industry. The 1.5V clear GRS505 bulb has proven to be an excellent loco and tender light for the larger O scale rolling stock. These 1.5V GOR size bulbs can be used on larger S, O, and G scale static models in lieu of the 1.5V micro bulbs provided in the liting kits. They work very well on emergency vehicles that come with the colored "gumballs" or lite bars already in place. These bulbs can also be used with the GRS1012 Vehicle Headlight/Taillight Liting Kit provided the model has plastic lens covers on both the headlight and taillights. Specifications: 1.5V (35ma), 3.0V (40ma.), 0.092" dia., 8" insulated leads, 5,000 hr. life. The insulated leads measure a mere .018" in diameter and the insulation at the base of the bulb is half the diameter of the bulb.

1.5V and 3.0V Super Micro Bulbs

Click Here

Even though competitively priced, we feel these are the best quality "hobby grade" micro bulbs available. Each is hand selected, pre-aged and tested before being packaged as a super micro bulb. Specifications: 1.5V, 15ma, 1.4mm dia., 8” insulated leads and 1,000 hr. life.

1.8V Heavy Duty Micro Bulbs

Click Here

These bulbs are rated "professional grade" and are considered the highest quality micro bulbs available anywhere. They are 1/10th mm smaller in diameter than our GRS100 micro bulbs, and are manufactured to extremely close tolerances with especially rugged filaments. This also helps create a noticeably brighter light output than the GRS100 series. Specifications: 1.8V, 50ma, 1.3mm dia., 7" insulated leads, 0.02cp and a 1,500 hr. life.

CK1010-10 12V - Swivel Spotlight Bulb

Click Here

This bulb provides an extremely bright beam of light, swivels in a 360 arc and allows 180 front-to-back rotation. Well suited as a freight yard light. Specifications: 12V, 180ma, 3/8" X 7/8", 5,000 hr. life.

CK1010-10